3D Printed Box ও Lid Design করার সহজ নিয়ম

3D Printed Box ও Lid Design করার সহজ নিয়ম

Electronics enclosure, storage box বা custom product casing—3D Printed Box ও Lid সবচেয়ে common functional CAD project-এর একটি। দেখতে simple হলেও fit, wall strength, lid clearance, screw access এবং print orientation ঠিক না হলে final assembly ব্যবহারযোগ্য হয় না।

3D printed box and lid CAD design

১. Internal Component থেকে শুরু করুন

PCB, battery, connector বা product-এর maximum envelope CAD-এ reference হিসেবে রাখুন। Component-এর চারপাশে assembly clearance এবং cable space দিন।

২. Wall Thickness Consistent রাখুন

Wall খুব thin হলে flex বা warp করতে পারে, আবার অপ্রয়োজনীয় thick wall material/time বাড়ায়। Nozzle size, material, enclosure size ও load অনুযায়ী wall design করুন।

electronics enclosure engineering

৩. Lid Fit-এর Clearance

Box-এর outer dimension আর lid-এর inner dimension এক রাখবেন না। Printer-specific clearance প্রয়োজন। Sliding lid, press-fit এবং loose removable lid-এর clearance আলাদা হবে—test coupon ব্যবহার করুন।

৪. Alignment Feature দিন

  • Inner lip
  • Corner locator
  • Pin/socket
  • Snap feature
  • Screw boss
product enclosure CAD design

৫. Screw নাকি Snap-fit?

বারবার খুলতে হলে screw + threaded insert robust option হতে পারে। Tool-less access দরকার হলে snap-fit useful, কিন্তু material flexibility ও layer orientation ঠিকভাবে design করতে হবে।

৬. Port ও Button Access

USB, switch, display, camera বা ventilation opening-এর position actual component measurement থেকে নিন। Connector plug ঢোকানোর জন্য শুধু port size নয়, plug body-এর clearance-ও রাখুন।

CAD enclosure modeling

৭. Corner Design

Sharp internal corner-এর বদলে fillet stress concentration কমাতে পারে এবং print path smoother করে। External fillet product feel উন্নত করে, তবে bottom edge-এর large fillet support প্রয়োজন করতে পারে।

৮. Prototype করুন

  1. Port/connector section test print
  2. Lid clearance sample
  3. Screw boss test
  4. Full empty enclosure print
  5. Component assembly
  6. Final revision
product enclosure quality check

Quick Checklist

  • Component clearance আছে?
  • Lid tolerance tested?
  • Port accessible?
  • Screw driver ঢুকবে?
  • Heat/ventilation considered?
  • Print orientation practical?

Custom electronics box, product casing বা assembly-ready enclosure CAD ও 3D Printing-এর জন্য Artin3D-এর সাথে যোগাযোগ করুন। Artin3D – Where ideas take shape.

Supporting photos: EnCata PD, Kumpan Electric এবং Tool., Inc via Unsplash.

    Leave a Reply

    Your email address will not be published. Required fields are marked *