কোন পরিবর্তনে আসলেই প্রিন্টারের সময় বাঁচে সেটি আগে মাপুন। গাইডে উদাহরণের সংখ্যা দিয়ে দেখানো হয়েছে কীভাবে সেই সময়ের মূল্য থেকে অতিরিক্ত প্লেটের খরচ ওঠার হিসাব করবেন।
A second build plate costs money today. Its benefit depends on how often your printer is ready for another order while the first plate is still occupied. If your Creality K1 Max usually sits idle between orders, faster changes may make an operator’s day easier without increasing sales. Before buying a compatible spare PEI kit, count the delays it could actually remove and put a value on those minutes.
View Product · Creality K1 Max PEI Kit
Follow one real changeover
Start when the machine finishes its final layer. Record when the operator is available, when the part can be removed according to the plate instructions, when the next file is approved and when the next print begins. Several waits can overlap. If cooling takes ten minutes and artwork approval takes fifteen minutes during the same period, eliminating the cooling wait does not move the next start forward. Record the event that actually holds up the next job.
Separate time saved from money earned
A minute of free machine time has value if you can use it. A workshop with a queue might fit another order into a shift. A workshop with fixed daily output might avoid operator overtime. Use the contribution from the extra order after its variable costs, or the labour cost genuinely avoided. Counting both for the same saved minutes can make a modest improvement look more profitable than it is.
Try the arithmetic with example numbers
Suppose the spare costs 2,400 taka delivered and each useful changeover saves eight minutes. Assume, only for this example, that the workshop can realise 150 taka of extra contribution per freed machine hour. Eight minutes is eight divided by sixty hours. Each useful changeover is therefore worth 20 taka. Dividing 2,400 by 20 gives 120 useful changes to recover the purchase cost. These figures illustrate the method and are not a price quote or a measured Artin3D result.
Count the useful changes in a week
If there are twenty changes per week but only six happen when a second job is ready, use six in the estimate. At six useful changes per week, the example payback is twenty weeks. At twelve it becomes ten weeks. Write a low and a high estimate beside the expected one. A seasonal school project rush can produce a different result from a quiet month.
Include the work the spare introduces
Allow for selecting the right surface, preparing the second sheet, keeping a suitable cooling location and checking a sample when the finish matters. Verify the kit contents and machine compatibility before assigning a purchase figure. A second plate does not double the throughput of one printer. It changes the interval between jobs only where the machine and operator can safely follow the documented exchange procedure.
Decide what would confirm the purchase
Keep the worksheet for a month of representative orders. Mark changeovers where the spare would have helped, and record any actual extra order the saved interval could accommodate. If you buy the sheet, repeat the timestamps after commissioning it. The comparison gives you a defensible answer when deciding whether to add another accessory or spend the same budget on the bottleneck further down the production line.

আরও পড়ুন এক প্রিন্টারে জরুরি ও নিয়মিত অর্ডারের সময় সাজানো
Artin3D | Where Ideas Take Shape.
WhatsApp or Call +880 1845 348757
www.artin3dbd.com
South Banasree Dhaka 1219



