Multi Plate CAD Revisions: Which Plates Need Reslicing?

Artin3D Protect a Revision guide featuring Smooth PEI Plate

ঢাকনার কেবলের ছিদ্র সরালে পুরোনো বডি ও ক্লিপ কাজ করবে কি না ছোট নমুনায় পরীক্ষা করুন। তারপর যে প্লেটের জ্যামিতি বা সেটিং বদলেছে সেটি নতুন সংস্করণ হিসেবে সংরক্ষণ করুন।

A customer asks to move a cable opening after the lid and body have already been arranged on different virtual plates. It sounds like one small CAD change. In a multi plate job, the change can affect a matching cutout, a cable clip and the packing illustration. The useful question is which items remain interchangeable. Before printing a new smooth PEI lid, map the revision from the customer’s request to every plate that depends on it.

View Product · Smooth PEI Plate

Write one precise change note

Start with the approved version and identify the changed feature in terms of a fixed reference. For example, the cable opening moves toward the rear edge of the case. Add a marked drawing with the new position. Avoid relying on a message that simply says move it left, because the designer and operator may be looking at opposite sides of the lid. Record whether the customer has already received an earlier version.

Trace mating features across the assembly

Follow the cable through the lid, past the clip and into the body. Check which parts physically touch or locate it. Identify any assembly drawings or printed labels that point to the old opening. Make a list with three possibilities for each item: affected, unaffected after verification, or awaiting a fit check. An unchanged file name is not evidence that a previously printed component still fits.

Separate the old and new production layouts

Make a new editable project for the revision. Update only the affected geometry and review the layout on every relevant plate. A changed body can overlap a neighbouring part or move a seam onto the visible smooth face. Inspect the first layer, supports, overall footprint and contact orientation before exporting the affected jobs again. Mark older exported files clearly so operators cannot send them by selecting the most familiar name.

Test the smallest real assembly

Print a short section containing the new opening and its nearest mating feature where practical. Bring the original clip and the actual cable to the bench. A cable passing through a bare opening proves little if its connector catches when the lid closes. If an old body remains compatible, mark one accepted example with the revision test record. If it fails, remove that older stock from the active order quantity.

Use a release sheet at the printer

For each plate list its revision, material, surface, quantity and approval state. The smooth PEI surface matters where the customer sees the lid, while a hidden cable clip may have a different requirement. Verify the settings and physical surface on the machine before each run. Keep test pieces separate from the deliverable items so an early prototype does not accidentally travel with the final parts.

Record what can be reused

After approval, write which old components may be combined with new ones and which combinations were tested. Add a photograph showing the assembled cable in its new position. If a customer later orders a replacement lid, the team can ask a specific question about the installed body and clip. That short compatibility record is worth more than a folder full of files distinguished only by dates.

Smooth PEI Plate at Artin3D Bangladesh
Smooth PEI Plate এর পণ্যের বিবরণ দেখুন

Artin3D | Where Ideas Take Shape.

WhatsApp or Call +880 1845 348757
www.artin3dbd.com
South Banasree Dhaka 1219

Comment (1)

Leave a Reply

Your email address will not be published. Required fields are marked *