পুরোনো স্পুল শেষ হওয়ার আগেই অল্প ফিলামেন্টে পরিচিত একটি অংশ প্রিন্ট করুন। নতুন লটের একই অংশ পাশে রেখে আলো ও টেক্সচার একই অবস্থায় রং তুলনা করুন।
A customer returns for six more display pieces in the same colour. The design and filament name are unchanged, but the original spool is almost empty and the replacement has a different lot number. Use the remaining material to print a bridge sample while both lots are available. It is a small, labelled piece that links the earlier batch to the proposed replacement under the same printing and viewing conditions.
View Product · Flexible Magnetic Plate
Reserve the old filament before it runs out
When a repeat order is likely, put aside enough original material for one representative sample. Record the spool label, colour name and any lot identifier. Keep an accepted finished piece if the customer permits it. A reference photo is useful for remembering the product, but white balance and lighting can shift the apparent colour. Two physical pieces in the same light are easier to compare fairly.
Copy the feature the customer actually sees
A flat swatch may suit a sign, while a ribbed curve may better represent a lampshade or enclosure. Include the actual wall thickness where translucency matters. Keep the orientation and visible face the same. If the customer sees the face produced by a flexible magnetic sheet, record the exact approved sheet and side used. Different contact textures can make the same material appear lighter or darker.
Compare old and new in one setup
Print the old lot sample and new lot sample with the appropriate documented profiles and the same geometry. If the materials require different settings, record the difference explicitly. Let each sample reach its final presentation condition. Place them beside the accepted original, all facing the same direction. Label their backs so you can shuffle them and repeat the comparison without relying on your memory of their positions.
Check the light where the item will live
First inspect the samples in diffuse daylight. Repeat under the display light at the customer’s site if practical. For a translucent component, use the intended background or lighting arrangement without placing material against a hot source. Watch for a difference at edges and thin regions as well as across the broad face. A colour match under workshop lighting may look less convincing beside a warm display lamp.
Decide what the order allows
For a matched group seen together, the buyer may prefer all six new parts from one approved lot. For a replacement fitted directly beside an older part, the comparison with that older part matters most. Show the actual sample pair and describe the viewing conditions. Keep approval with the order. Avoid promising an invisible match based solely on two spools sharing the same product name.
Keep the bridge with its records
Write the original and new lot identifiers, job number, sheet face and sample date on the storage envelope. Add a photograph that shows both samples together. If a third spool is introduced later, compare it against the approved reference for the customer’s current order. Matching each new lot only to its immediate predecessor can let small differences accumulate across a long production series without anyone noticing the overall drift.

আরও পড়ুন এক স্পুলে সব প্লেটের কাজ শেষ হবে কি না হিসাব
Artin3D | Where Ideas Take Shape.
WhatsApp or Call +880 1845 348757
www.artin3dbd.com
South Banasree Dhaka 1219



