How to Reprint Missing Parts From a Multi Plate Batch

Artin3D Recover One Plate guide featuring Bambu Lab Textured PEI

বিশটি পিসের মধ্যে সতেরোটি পাস করলে আগে বাকি তিনটির পরিচয় মিলিয়ে নিন। পুরোনো ফাইল অক্ষত রেখে ওই তিনটির জন্য আলাদা লেআউট বানালে পরের পুরো অর্ডারের হিসাব ঠিক থাকে।

When one piece fails on a crowded build plate, restarting the whole file can waste both filament and an afternoon. The correct recovery depends on how many parts actually passed inspection, whether they belong to matched sets and what caused the failure. A replacement run on a compatible Bambu Lab textured PEI plate should have its own layout and count. Preserve the original project so a quick repair does not become the accidental master file.

View Product · Bambu Lab Textured PEI

Count finished pieces before editing the file

Imagine a run of twenty identical name holders. After normal release, seventeen pass. Two have a lifted corner and one has a damaged clip. Place the three rejects outside the accepted tray. If the customer ordered twenty and there is no compatible spare stock, you need three more accepted holders. Do not count the damaged clip as a separate required part if it is integral to a holder already counted as rejected.

Check whether the missing parts are interchangeable

Twenty items can share the same outline but carry different names, sizes or revisions. If three personalised holders fail, record the three exact names. For matched colours or surface finishes, keep a physical sample from the accepted group. A spare from another spool may fit perfectly and still look wrong beside the rest of the set. Verify the actual replacement requirement with the packing list before slicing.

Recover the reason as well as the quantity

Mark where the rejected pieces sat on the original plate. Compare a lifted corner with nearby accepted parts. If failures cluster in one region, inspect the cooled sheet seating and condition using the manufacturer’s instructions. If the same thin feature fails in different positions, examine the model and handling sequence. Repeating the same three parts without investigating a common defect can add another repair run to the queue.

Build a separate repair layout

Duplicate the editable project and name the copy with the order reference and replacement quantity. Retain the approved orientation, filament and surface settings unless a specific change is justified. Inspect the sliced layers again. Removing neighbouring objects can change the travel sequence, and a short run may have a different time per layer. A smaller layout deserves its own preview and time estimate.

Inspect against the original accepted group

Let the repaired pieces reach the normal removal condition. Compare their fit, underside finish and visible colour with the retained sample. For personalised work, read the names directly against the source order. Place the approved replacements in the customer tray and update accepted quantity only once. If two replacements pass and one fails, the outstanding quantity is one. Keep that number visible until packing confirms it.

Record the recovery cost

Add the filament estimate, actual elapsed time and inspection result for the repair run to the order notes. If the same failure repeats on future jobs, those records show where a design or process change would save the most effort. If it was a single handling accident, the separate repair file still provides a clean record of what was produced. Keep the successful full layout as the starting point for the next normal order.

Bambu Lab Textured PEI at Artin3D Bangladesh
Bambu Lab Textured PEI এর পণ্যের বিবরণ দেখুন

Artin3D | Where Ideas Take Shape.

WhatsApp or Call +880 1845 348757
www.artin3dbd.com
South Banasree Dhaka 1219

Comment (1)

Leave a Reply

Your email address will not be published. Required fields are marked *